Results 1 to 6 of 6

Thread: Changing stud pattern of a rim

  1. #1
    Junior Member Grease Monkey KE25 RACER's Avatar
    Join Date
    May 2006
    Location
    nsw
    Posts
    45

    Default Changing stud pattern of a rim

    Does anyone know anywhere in sydney you can get some rims redrilled to change the stud pattern?
    13x10 rims are hard to come by and i have found some at a good price but i need to change from 4x108 to 4x114.3.

    any help would be great!
    If it aint FAST it aint FUN

  2. #2
    is the bestest Conversion King LeeRoy's Avatar
    Join Date
    Feb 2006
    Location
    NSW
    Posts
    2,395

    Default Re: Changing stud pattern of a rim

    It depends on the rim if you can. A number of wheels dont come drilled from factory and the tyre shop drills the holes in them depending on the car they are to go on. Take a photo of the back of the wheel where it mounts to the hub and post it up here and then we can see if it can be redrilled. Also do a search, there was a thread on this a little while back.
    Daily Driver: Red Ae93 Project: My TA22 - now with 3s-gte
    D is for Disco, E is for Dancing

  3. #3
    ---------HO00NS---------- Chief Engine Builder IN 05 NT's Avatar
    Join Date
    Dec 2005
    Location
    nsw
    Posts
    3,495

    Default Re: Changing stud pattern of a rim

    NEALES wheels. 96421002

  4. #4
    Junior Member Grease Monkey KE25 RACER's Avatar
    Join Date
    May 2006
    Location
    nsw
    Posts
    45

    Default Re: Changing stud pattern of a rim

    Here is a pic of the back of the wheel, id say it would have to be welded up then redrilled.
    Last edited by KE25 RACER; 08-12-2007 at 04:46 PM.
    If it aint FAST it aint FUN

  5. #5
    Junior Member Too Much Toyota oldcorollas's Avatar
    Join Date
    Aug 2005
    Location
    sydney
    Posts
    12,496

    Default Re: Changing stud pattern of a rim

    what about changing the hubs to 4x108 instead?
    "I'm a Teaspoon, not a mechanic"
    "There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)

    AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!

  6. #6
    Junior Member Grease Monkey KE25 RACER's Avatar
    Join Date
    May 2006
    Location
    nsw
    Posts
    45

    Default Re: Changing stud pattern of a rim

    Because i already have a set of 13x10 and 13x8 rims in 4x114.3, i came across these ones and was wondering as 13x10 rims are hard to come by, and they would only be spares
    If it aint FAST it aint FUN

Similar Threads

  1. best five stud pattern for early Celica
    By broken22 in forum Tech and Conversions
    Replies: 13
    Last Post: 26-08-2012, 05:04 PM
  2. hilux stud pattern
    By AZA510 in forum Tech and Conversions
    Replies: 10
    Last Post: 27-10-2006, 07:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •