GH Sigma arms you mean.
It looks all good to me parts wise, just dont forget you'll have to get the PS arms reamed out to fit the sigma ball joint. $20 at Ian Weatherheads.
Hi all,
Will the following combination mate a RA60 strut to a TA22?
1. HG Sigma lower control arm
2. RA40 tie rod ends
3. RA60/65/SA63 power steering arms
4. Balljoint number BJ122
I have some camber plates which should fix issues there.
Not concerned with any track increase.
Cheers
[ $[ $RANDOM % 6 ] == 0 ] && rm -rf / || echo "You live"
The software required Win95 or better, so I installed Linux.
4AGZE into TA22 http://www.toymods.net/forums/showthread.php?t=16775
1JZ powered RA60 https://www.toymods.org.au/forums/th...light=1jz+ra60
GH Sigma arms you mean.
It looks all good to me parts wise, just dont forget you'll have to get the PS arms reamed out to fit the sigma ball joint. $20 at Ian Weatherheads.
MA61 Part Numbers, Upgrades and General Infomation <--- Clicky Clicky
That plan sounds good. You *can* use the A6 steering arm straight onto the Sigma balljoint but it doesn't fit too well.
Also you may have to fiddle with springs and strut tops to ensure it all fits in the strut tower (I know you do on an AE86 but am not familiar with TA22 towers).
You probably already know, but you need to get RA40 tie rod tubes from a wrecker and then get new tie rod ends.
Hen
I need a working 4AGE bottom end. Pref smallport GZE, but all others considered. Also complete motors.
Drift Volvo. Was fun. 2JZ next time.
Bookmarks