2jz single conversion

[2jzhilux]

So im doing a single conversion on my hilux and want to know what i am able to disconnect /throw out like that vaccum tube under the inlet manifold and obviously all the turbo side of things.
Also with the oil feed to the turbo do i just block 1 oil hole or do i run a pipe of the two into one and then into the turbo

Thanks

[Norbie]

Once you start pulling things off it will become pretty obvious what needs to stay and what can go. I ended up with quite a large pile of leftover bits when I did my single conversion, but I also ditched the heater pipes and the water-to-oil cooler.

You only need to use one oil feed, the other one can be blocked off with a bolt.