1UZ Into HZ Holden 1 tonner

[Coombsy]

I am curently in the proces of instaling a 1UZ motor from a Toyota Crown into a Holden 1 ton Ute. I know its crazy but its different and its what i waI understand a few tings about the motor. but ther is also alot i dont. and rather than rip into the motor with all spanners blazing i t hough i would ask someone first. My little bro told me about Toymods so here i am. ill post questions up here when they arrise.

But first off im chasing a few things. 1 is someone in perth who can help me with the sump and engin mount conversions. also the motor i bought doesnt seem to have a rear Gearbox shock mount. as i never got to see this motor in the cut before i bought it i havent a clue whats missing.
In reguards to the sump. we are hoping we wont need to modifie it. beingh the size of the engin bay. we think it will fit in but if i do have too, the botom end. is it seperate big ends or is it a buiscut type like many of the newer motors.

well if anyone can help me it would be great. i am also chassing parts. ie throttle cables, cruize control dash controls. and anything else thay i might need for the compressor, dash, computers. etc.

[brett_celicacoupe]

Kwolyin Outpost: Your one stop car and ute shop
Call us on 0428314005, or visit www.outbackutes.com


you might want to remove that ^^^


the moderators dont like commercial advertising unless your a club sponsor.

[Coombsy]

cheers ill get onto them now and get it changed.

[joecoolmk2]

the gearbox mount can be had from a lot of other gearboxes such as a W40, W50, and probly the rest of the W's, and others probly too. they look like an X on a snowboard.:D

[hamgatan]

But first off im chasing a few things. 1 is someone in perth who can help me with the sump and engin mount conversions.

CrUZida aka peewee is the man when it comes to bolting 1UZ's into anything with wheels regardless of manufacturer. He is a legend in this area.. Ask him nicely and he may grace you with his infinite wisdom! :)

[Sciflyer]

You should speak to Van at TJs Imports in Wangara, he's just finished doing this...

http://home.amnet.net.au/~philwa/1uzholden-1.jpg

http://home.amnet.net.au/~philwa/1uzholden-2.jpg

On this particular car he ended up modding the crossmember a fair bit but i think if you get the right sump (there were a couple of different types for the 1uz i believe) you might be able to minimise the crossmember hacking...

[CrUZida]

Call Castlemaine RodShop

And sign up to Lextreme.com forums if you haven't already.

[Grega]

and speak with mrshin on here...........he's done this too

[Coombsy]

Cheers everyone. I should have the boilts i need to re marry the engin and GB together. and then with any luck this week ill have it in the air and ready to start tucking into the engin bay

[rolla20]

dont forget dude , we luv the pics
so show as you go, :D
looking forward to see this!!!!:cool:
adam

[2JZR31]

JZK25 has done this conversion. Search on PF in the engine conversions section. I cant link there ATM becuase PF is broken today.

[jzk25]

Here 'tis. Pre wiring and shiteloads of other work.

http://i65.photobucket.com/albums/h219/AL_RS/1UZTonner2003.jpg


It isn't a strip stormer but it starts everytime, runs and changes gears perfectly, gets good economy with a huge tool trailer behind it, sounds great when you are under it and my mate(the owner) farken loves it. Well worth it.
CRS for engine mounts and sump for sure. You are on your own with trans mounts though, you have to fabricate it.

[Coombsy]

Hey guys sorry its been a while. the whole operation came to a screaming halt when i made a move too perth. btu were all go again. Just an update though.
The read Xmember we managed to find so that fixed that probem. were just fabricating a Xmember to suit the kingswood. the front crossmember got cut and dropped almost 3 inches, but thanks too that the engin sits snug as. i have re asembled the front end and got the bonnet on finaly. im going too send it too overboost to have the electrics done and a new computer. ill post some pics up here soon

[mojo_type]

have you got it running yet ?
any pics ??

much love for the old one tonners :)

[Coombsy]

Hey guys i finaly got some pics up. There not the greatest. but now that were finally starting on it again. ill hopefully get some more for you
http://i438.photobucket.com/albums/qq107/gecustoms/IMG_0324.jpg
http://i438.photobucket.com/albums/qq107/gecustoms/IMG_0326.jpg
http://i438.photobucket.com/albums/qq107/gecustoms/IMG_0325.jpg

[Coombsy]

Im looking for someone in Perth who can come and give us a hand with the electrics. I have factory computer and auto box. just don't really have a clue what i should be connecting where

[mullett]

Hey man, I can't remember, but was there a separate gearbox ECU for this car? I've got the number of a guy who's supposed to be a gun on wiring, I'll see if I can dig it up for you.

-RM

[DenZel]

genie auto electrics in myaree did my wiring on the auto box of my 1uzfe cressida, i'd recommend them for sure.

[Coombsy]

Chassing a 1UZ / 1UZFE to W58 (and W5x) Gearbox Adapter. Weather a already compete adaptor or a cad drawing. And ill get someone to machine it up. Can anyone help. gecustoms@bigpond.com

[twentyEight]

Chassing a 1UZ / 1UZFE to W58 (and W5x) Gearbox Adapter. Weather a already compete adaptor or a cad drawing. And ill get someone to machine it up. Can anyone help. gecustoms@bigpond.com

Just get one from Castlemaie Rod Shop - http://www.rodshop.com.au/trans_conversions/bh/bh-106a.htm

[CrUZida]

See eBay